What should be paid attention to when printing adhesive labels? The adhesive label manufacturer will show you. It is necessary to separate the text on the offset printing from the cutting edge. 3mm to prevent being cut during cutting.

The adhesive label manufacturer said they need to refer to CMYK to request printing colors, and it is necessary for customers to refer to the percentage of CMYK chromatography to determine the manufacturing filling color. The same document may have different colors when printed at different times, and it is normal for the color difference to be within 10% (because the ink volume may vary each time). During the process of adhesive printing, please try to avoid using combinations of dark colors or full page colors in color block matching, otherwise simple cutting after printing will cause back printing. The color of the adhesive backing or base image shall not be less than 10% to prevent it from appearing when printing the finished product. The thickness of the wireframe for all adhesive input or self drawn graphics must not be less than 0.1mm, otherwise the printed product will be broken or unable to be displayed.

The adhesive label manufacturer says that when the gradient object is placed in the frame for precise cutting, please convert it into a bitmap. Because the placed frame gradually rotates after grouping with other objects, the gradient direction does not rotate together. In addition, the 'edge width' cannot be set for any gradient object, and sometimes insufficient gradient edge filling may occur due to different interpretations of the output machine.

The adhesive label manufacturer says that when printing with double-sided double folded finger pricks, please indicate the fold line and front and back sides. Regardless of hand printing, card printing, single-sided printing, or double-sided printing, regardless of the number of people or styles, they should be placed on the same page and should not be manufactured in separate pages.

The adhesive label manufacturer said that two invisible wireframes can be used as a manufacturing scale and layout for 92x56mm. After cutting, it is 90x54mm (leaving 1mm of bleeding on each side). If you have special requirements, please indicate them in the order and uploaded documents.

Pay special attention to any images, color blocks, or lines that exceed the manufacturing scale, please place them in the box. Do not decorate with white color blocks to prevent confusion when forming a composite version.

Adhesive label manufacturers remind everyone to remember the above content when printing adhesive labels. Only by mastering some printing requirements can our adhesive labels be printed with better results.

The self-adhesive label manufacturer said that the curved bottle body design deliberately adds a rounded feeling to even the corners of the bottle label. Upon careful observation, it can be seen that the production map is pressed on the label, fully linking the product with the region. In the limited time bidding mode, the printing factory that issues the demand can receive five quotations within half an hour, and the quotation details will display the advantages and characteristics of each third-party printing factory. Printing factories can choose the best and select third-party printing factories with high cost-effectiveness for production, reducing the selection and printing costs in outsourcing processes.